Editorial desk
OctoPrintLab Editorial
The editorial desk that publishes OctoPrintLab. It is a byline for the site's editorial process, not a person, and this page carries no author biography because there is no individual author to describe.
How this desk works
- Articles are researched from primary sources: vendor and project documentation, published standards and specifications, release notes, advisories, and measurements published by the people who took them.
- Drafts are produced with AI assistance and then edited against those same sources before publication.
- Nothing published here claims hands-on lab testing, benchmarking, or first-hand measurement. Where a figure comes from a datasheet or someone else's test, the article names the source.
- Corrections go to hello@octoprintlab.com and are made on the affected page. Funding is set out on the disclosure page.
Posts (6)
- how-to
How to Add a Webcam to OctoPrint: USB and Pi Camera
Add a USB webcam or Raspberry Pi camera to OctoPrint: which OctoPi image to flash, the config files to edit, stream URLs and settings that hold up.
- guides
OctoPrint Plugins Worth Installing (and Which to Skip)
Which OctoPrint plugins are worth installing on a Raspberry Pi host: what each one fixes, what it costs the host and serial link, and how to check it.
- troubleshooting
OctoPrint Disconnects Mid-Print: Causes and Fixes
A diagnostic order for OctoPrint disconnects and communication errors, from undervoltage and USB noise to plugin faults and starved serial buffers.
- getting-started
OctoPrint Raspberry Pi Setup: Hardware and First Boot
Which Raspberry Pi to buy for OctoPrint, the power supply and cable choices that actually matter, and how to get through first boot without a stall.
- comparisons
OctoPrint vs Klipper: Which Print Host to Run
OctoPrint and Klipper are not the same kind of software. What each one replaces, what the switch costs you, and how to decide before you commit.
- getting-started
OctoPrint Remote Access: Tailscale, VPN, No Port Forwarding
Set up OctoPrint remote access with Tailscale, WireGuard, an authenticated proxy or OctoEverywhere, with checks for login, webcam access and routing.